How to Use RC Toys: From Preparation to Care After Playing Safely

Knowing how to use RC toys is very important for safe play. This will give you peace of mind while playing, without worrying about controller issues.

Using RC toys is very easy, but you still need to pay attention to safety. This cannot be separated from preparation before playing, during play, and after play. 

This article will help you learn how to use RC toys safely, from preparation to care after playing. 

How to Use RC Toys

Check the condition before playing 

Before playing with your RC toy, it is recommended to check it and make any necessary repairs. Check the bottom, wheels, and battery compartment. Tighten any loose screws that may have come loose after driving at high speeds or off-road. Make sure there are no cracks or wear to avoid body vibration, unstable wheels, or even frame damage.

Some RC toy parts, such as tires, gears, or servos, have a specific lifespan. Replace these parts immediately if they become unresponsive, noisy, or if their performance declines. Do not wait until the part is severely damaged, as it can damage other components as well.

If you have spare parts, you can replace the damaged ones immediately before playing. However, if you don’t have them, it’s best to postpone playing until the damaged components have been repaired.

Choose a safe playing area

Each RC toy is designed for use in its own terrain. For example, RC toy cars are used on flat roads or tracks. Meanwhile, RC toy trucks can be used on muddy, dirt, and rocky terrain. 

Do not use RC toys in conditions that are not suitable for the terrain. Forcing them to traverse terrain that is not suitable for their specifications can damage the wheels and suspension. Even the motor can become overloaded.

In addition to matching the type of RC toy to the play area, you also need to pay attention to wet conditions. Check whether the electronic components are waterproof or coat them yourself with waterproof materials such as resin or silicone. If the RC toy is not waterproof, avoid getting it wet. Components such as ESC, servo, and receiver are vulnerable to water.

Pay attention to your driving speed

Driving an RC car requires good control. You cannot drive at random speeds. Understand your driving abilities. Don’t be too hasty to speed up while playing.

In addition, you also need to adjust your speed to the surface conditions. Pay attention to the gas, brakes, and steering wheel. You must be careful on slippery surfaces and puddles. Avoid driving at high speeds in these areas, as it may cause hydroplaning and loss of control.

Clean after playing

Clean your RC toy immediately after playing. This is the best time to clean your toy because dirt is still easy to remove. The more often your RC toy is used, the more often it needs to be cleaned.  

Do not leave your toys dirty, as this can interfere with the performance of the motor or servo and accelerate component wear. Clean dirt, dust, sand, mud, or grass clippings from the wheels, suspension, and inside the body.

After cleaning, don’t forget to dry them properly: If there is water trapped in the tires, hang and rotate the tires to remove the water. 

Cleaning your toy after playing is part of maintaining RC toy. A well-maintained toy will last longer and can be used for a long time. 

That’s how to use RC toys safely. You need to check the toy every time before using it to make sure there are no damaged components or parts that need to be replaced. That way, there won’t be any problems when you start playing with it.

Make sure you play with it on terrain that is suitable for the type of RC toy you have. Pay attention to the speed and wet areas when playing with it. And lastly, don’t forget to clean it after playing. That way, you can always play with it safely.